PCB Instant Quote! 24-hour PCB production.
Quote Now
0755-27781532-8010; 02988446863
Home > News > Consumer Visit > 2026 a Belarusian Lighting Client Delegation Visited Xing Da: Explore One-Stop PCBA Cooperation

2026 a Belarusian Lighting Client Delegation Visited Xing Da: Explore One-Stop PCBA Cooperation

Nov 19 Intelligent Browse: 2

On November 6, a lighting industry client delegation from Belarus visited Xing Da. The delegation comprised the production quality control manager - Uladzislau Yakshuk, product manager - Serjo Gorgeous , and logistics & transportation manager - Igor. The visit focused on on-site verification of the company's PCBA manufacturing capabilities and in-depth discussion of one-stop manufacturing and supply chain collaboration for lighting PCBA.


1.Client Background and Visit Objectives

The client is deeply engaged in LED lighting and supporting hardware and is a sizable lighting solution provider in Eastern Europe. It owns its own lighting brand, with a dealer network covering multiple Eastern European countries, and has strong experience in furniture lighting and smart LED light source products. At present, its LED lighting products are produced in separate stages by three different manufacturers. This fragmented, multi-vendor setup makes unified quality control difficult. During this visit, the client aimed to identify a one-stop alternative supplier capable of integrating the production process and improving supply chain stability and quality controllability.


2.On-Site Review of PCBA Manufacturing and Quality Control

Accompanied by the company's business and technical team, the delegation first entered the SMT workshop and toured four fully automated SMT lines and the intelligent production monitoring system. The lines achieve placement accuracy of ±0.05 mm with CPK ≥ 1.33, covering component placement from 0201 (0.6 mm × 0.3 mm) micro-components up to 5050 LED packages. The delegation reviewed real-time first-pass yield data and focused on changeover efficiency for mixed-model lighting PCBA production. The company explained that, supported by MES poka-yoke verification and offline smart feeder preparation, changeover downtime is compressed from the conventional 45–60 minutes to within 10 minutes, matching the client's multi-variant order structure across furniture lighting and smart light source products.

The delegation then visited the functional test area and finished-product assembly section. Regarding electrical safety and reliability of lighting PCBA, the quality team presented key release criteria: insulation resistance ≥ 100 MΩ at 500 VDC, hipot test at AC 1500 V for 60 s without breakdown, ionic cleanliness ≤ 1.56 μg NaCl/cm², and solder joint visual acceptance per IPC-A-610. For LED lighting PCBA incorporating aluminum substrates, the lines also support -40°C to 125°C temperature cycling and 85°C/85% RH damp-heat aging verification, covering the long-term reliability demands of Eastern European indoor–outdoor temperature swings and seasonal humidity variation. The client showed particular interest in the digital traceability system. Each PCBA carries a unique SN as the data anchor, binding component lots, placement programs, AOI results, test data, and operators — enabling board-level forward traceability and reverse isolation.


3.Business and Technical Exchange on One-Stop PCBA Cooperation

After the workshop tour, the two sides held a dedicated business and technical exchange. The client acknowledged that under its current three-vendor model, SMT data and driver/assembly data remain isolated, making it difficult to determine within 24 hours whether a batch anomaly originates from placement offset, component lot, or a test escape. [Company Name] responded that the core value of one-stop manufacturing is not merely co-locating processes, but linking test data on a single SN chain. For example, SPI solder paste inspection results, placement coordinate deviations, AOI defect classification, and burn-in test data are aggregated in MES for each board. When a field failure is reported, the finished-product SN can be traced directly back to the placement line, component lot, and operating shift.

The two sides also exchanged views on process requirements for smart lighting control PCBA. The company's existing process capability covers board-level integration of DALI-2, Zigbee 3.0, and Bluetooth Mesh protocol modules, with driver PCBA achieving power factor > 0.98 and THD < 5%, applicable to the client's smart LED light source and furniture dimming products for the Eastern European market. The client recognized these specifications and the company's full-process PCBA manufacturing qualifications, and expressed intent to initiate a pilot production evaluation on a specific lighting model.


4.Follow-Up and Project Evaluation

The factory visit further strengthened mutual understanding and trust. The client spoke positively of the company's automated production lines and digital quality control capabilities. Going forward, Xing Da will continue to follow up on the client's needs and advance the evaluation of the lighting PCBA project. Leveraging its one-stop manufacturing capabilities, the company looks forward to providing the client with a stable and controllable supply chain solution and achieving mutual benefit.




Label: